タイトルまたは説明

DE*4R Instruction

DE Series firing system worked by **0/**0V AC or *2/*4V DC.  It has the test function. Each channel could fire about *0pcs igniters if by AC, about *0pcs igniters by DC. This series firing system could salvo fire,sequential fire   and step by step fire.Time range is from 0.**9.9s. It can be remote and manual control.  

Connect & Test

1.  Please put the power plug of firing system into **0V/**0V AC, or connecting DC by DC plug on machine.

2.  Please turn on the power switch, then move the to testposition. If the power lamp light and time table shows:9.9s.It indicates the system is in good condition.

3.  Please connect the products into black & red clip. There are LED for each channel. If the LED turns red. It indicates that products are connecting well. Its very easy for test

4.  Please move the to fireposition, then you can fire.

Salvo fire & Sequential fire

1. Salvo: The time table shows: 9.9s when the power was ready. After you press timeone time, the time table will change to 0.0s. Please presssalvo now.

2. Sequential: Once you press the time one time, the sequential time will add 0.1s. When it is adjust to the time that you need , please press rapid  , it will make firing system sequential fire. If you need reset sequential time, please cut off the power for about 2 seconds.

3. Step fire:  Please make sure that the time table shows 0:0. Then please press step or 1.2.3 one by one. Both way will make it fire step by step.

4. Number of cues: What the time table shows is the sequential cue numbers during the sequential fire.

Attentions:

1.  Please dont make it to be short circuit for that would damage machine.

2.  If connecting products in series, Because the resistively of ignition dissimilarity from different factory , please use the products which made by the same factory;

3.  Please turn off the power switch when the circuit connecting but do not use it , and notice to do not shake machine violently;

4.  Dont press FIRE after pull out electrical outlet, for there is left power would ignite products;

5.  Please dont place the product in the damp , sour ,alkali and pollution environment.

Accessories & Parameters

Channels:         *4

Weight:           4KG

Dimension:       *7**3**3CM

Remote range:     **0M.

Remote frequency :  **3MHZ   

Remote battery: *3A

Safety switch for testand fire

Please move the switch to the Remoteposition. The transmitter is divided into A and B parts. Please move to Aposition to run *2 channels in A part. The same with Bpart.